View STD95N4F3_865373.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

february 2007 rev 1 1/14 14 STD95N4F3 stp95n4f3 - stu95n4f3 n-channel 40v - 5.4m ? - 80a - dpak - to-220 - ipak stripfet? power mosfet general features standard threshold drive 100% avalanche tested description this n-channel enhancement mode power mosfet is the latest refinement of stmicroelectronics unique ?single feature size??strip-based process with less critical alignment steps and therefore a remarkable manufacturing reproduc ibility. the resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and low gate charge . applications switching application internal schematic diagram type v dss r ds(on) i d pw STD95N4F3 40v <6.5m ? 80a 110w stp95n4f3 40v <6.5m ? 80a 110w stu95n4f3 40v <6.5m ? 80a 110w 1 3 1 2 3 dpak to-220 3 2 1 ipak www.st.com order codes part number marking package packaging STD95N4F3 95n4f3 dpak tape & reel stp95n4f3 95n4f3 to-220 tube stu95n4f3 95n4f3 ipak tube
contents STD95N4F3 - stp95n4f3 - stu95n4f3 2/14 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
STD95N4F3 - stp95n4f3 - stu95n4f3 electrical ratings 3/14 1 electrical ratings table 1. absolute maximum ratings symbol parame ter value unit v ds drain-source voltage (v gs =0) 40 v v gs gate-source voltage 20 v i d (1) 1. current limited by package drain current (continuous) at t c = 25c 80 a i d drain current (continuous) at t c = 100c 65 a i dm (2) 2. pulse width limited by safe operating area drain current (pulsed) 320 a p tot total dissipation at t c = 25c 110 w derating factor 0.73 w/c dv/dt (3) 3. i sd < 80 a, di/dt < 400a/s, v ds < v (br)dss , tj < tjmax peak diode recovery voltage slope 8 v/ns e as (4) 4. starting tj = 25c, i d = 40a, v dd = 30v single pulse avalanche energy 400 mj t j t stg operating junction temperature storage temperature -55 to 175 c table 2. thermal resistance symbol parameter value unit to-220 ipak dpak rthj-case thermal resistance junction-case max 1.36 c/w rthj-a thermal resistance junction-ambient max 62.5 100 -- c/w rthj-pcb (1) 1. when mounted on 1inch2 fr-4 2oz cu board thermal resistance juncti on-ambient max -- -- 50 c/w t l maximum lead temperature for soldering purpose 300 275 -- c
electrical characteristics STD95N4F3 - stp95n4f3 - stu95n4f3 4/14 2 electrical characteristics (t case =25c unless otherwise specified) table 3. static symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250a, v gs = 0 40 v i dss zero gate voltage drain current (v gs = 0) v ds = max rating, v ds = max rating,tc = 125c 10 100 a a i gss gate body leakage current (v ds = 0) v gs = 20v 200 na v gs(th) gate threshold voltage v ds = v gs , i d = 250a 24v r ds(on) static drain-source on resistance v gs = 10v, i d = 40a 5.4 6.5 m ? table 4. dynamic symbol parameter test conditions min typ. max. unit g fs (1) 1. pulsed: pulse duration = 300s, duty cycle 1.5% forward transconductance v ds =25v, i d =40a 100 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds =25v, f=1 mhz, v gs =0 2200 580 40 pf pf pf q g q gs q gd total gate charge gate-source charge gate-drain charge v dd =20v, i d = 80a v gs =10v (see figure 13) 40 11 8 54 nc nc nc
STD95N4F3 - stp95n4f3 - stu95n4f3 electrical characteristics 5/14 table 5. switching on/off (inductive load) symbol parameter test conditions min. typ. max. unit t d(on) t r turn-on delay time rise time v dd =20v, i d = 40a, r g =4.7 ?, v gs =10v (see figure 15) 15 50 ns ns t d(off) t f turn-off delay time fall time v dd =20v, i d = 40a, r g =4.7 ?, v gs =10v (see figure 15) 40 15 ns ns table 6. source drain diode symbol parameter test cond itions min. typ. max. unit i sd i sdm (1) 1. pulse width limited by safe operating area source-drain current source-drain current (pulsed) 80 320 a a v sd (2) 2. pulsed: pulse duration = 300s, duty cycle 1.5% forward on voltage i sd =80a, v gs =0 1.5 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =80a, di/dt = 100a/s, v dd =30v, tj=150c (see figure 14) 45 60 2.8 ns nc a
electrical characteristics STD95N4F3 - stp95n4f3 - stu95n4f3 6/14 2.1 electrical characte ristics (curves) figure 1. safe operating area figure 2. thermal impedance figure 3. output characteristics figure 4. transfer characteristics figure 5. static drain-source on resistance figure 6. normalized bvdss vs temperature
STD95N4F3 - stp95n4f3 - stu95n4f3 electrical characteristics 7/14 figure 7. gate charge vs gate-source voltage figure 8. capacitance variations figure 9. normalized gate threshold voltage vs temperature figure 10. normalized on resistance vs temperature figure 11. source-drain diode forward characteristics
test circuit STD95N4F3 - stp95n4f3 - stu95n4f3 8/14 3 test circuit figure 12. switching times test circuit for resistive load figure 13. gate charge test circuit figure 14. test circuit for inductive load switching and diode recovery times figure 15. unclamped inductive load test circuit figure 16. unclamped inductive wavefo rm figure 17. switching time waveform
STD95N4F3 - stp95n4f3 - stu95n4f3 package mechanical data 9/14 4 package mechanical data in order to meet environmental requirements, st offers these devices in ecopack? packages. these packages have a lead-free second level interconnect. the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com
package mechanical data STD95N4F3 - stp95n4f3 - stu95n4f3 10/14 dim. mm. inch min. typ max. min. typ. max. a 2.2 2.4 0.086 0.094 a1 0.9 1.1 0.035 0.043 a2 0.03 0.23 0.001 0.009 b 0.64 0.9 0.025 0.035 b4 5.2 5.4 0.204 0.212 c 0.45 0.6 0.017 0.023 c2 0.48 0.6 0.019 0.023 d 6 6.2 0.236 0.244 d1 5.1 0.200 e 6.4 6.6 0.252 0.260 e1 4.7 0.185 e 2.28 0.090 e1 4.4 4.6 0.173 0.181 h 9.35 10.1 0.368 0.397 l 1 0.039 (l1) 2.8 0.110 l2 0.8 0.031 l4 0.6 1 0.023 0.039 r 0.2 0.008 v2 0 8 0 8 dpak mechanical data 0068772-f
STD95N4F3 - stp95n4f3 - stu95n4f3 package mechanical data 11/14 dim. mm. inch min. typ max. min. typ. max. a 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 d 15.25 15.75 0.60 0.620 e 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 f 1.23 1.32 0.048 0.052 h1 6.20 6.60 0.244 0.256 j1 2.40 2.72 0.094 0.107 l 13 14 0.511 0.551 l1 3.50 3.93 0.137 0.154 l20 16.40 0.645 l30 28.90 1.137 ?p 3.75 3.85 0.147 0.151 q 2.65 2.95 0.104 0.116 to-220 mechanical data
packaging mechanical data STD95N4F3 - stp95n4f3 - stu95n4f3 12/14 5 packaging mechanical data tape and reel shipment dpak footprint dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0.795 g 16.4 18.4 0.645 0.724 n 50 1.968 t 22.4 0.881 base qty bulk qty 2500 2500 reel mechanical data dim. mm inch min. max. min. max. a0 6.8 7 0.267 0.275 b0 10.4 10.6 0.409 0.417 b1 12.1 0.476 d 1.5 1.6 0.059 0.063 d1 1.5 0.059 e 1.65 1.85 0.065 0.073 f 7.4 7.6 0.291 0.299 k0 2.55 2.75 0.100 0.108 p0 3.9 4.1 0.153 0.161 p1 7.9 8.1 0.311 0.319 p2 1.9 2.1 0.075 0.082 r 40 1.574 w 15.7 16.3 0.618 0.641 tape mechanical data all dimensions are in millimeters
STD95N4F3 - stp95n4f3 - stu95n4f3 revision history 13/14 6 revision history table 7. revision history date revision changes 22-feb-2007 1 first release
STD95N4F3 - stp95n4f3 - stu95n4f3 14/14 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2007 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STD95N4F3

	To Download STD95N4F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .